HomeLog inRegister

Display results as :
Rechercher Advanced Search


Share | 

 Samsung S3650 Genio disassembly

View previous topic View next topic Go down 
®Administrator F.H.F®


Age : 37
Location : INDONESIA
Job/hobbies : Web Design And Programers
Join date : 2011-03-19
Posts : 219
Rep Rep : 1230

PostSubject: Samsung S3650 Genio disassembly   Mon May 14, 2012 10:53 am

  • Remove your back cover, battery, sim and memory card. Six screws
    need to be removed, circled in red. Once you have removed the screws you
    can remove the battery compartment. To do so, pry open the clips,
    circled in white, then pry the battery compartment away from the rest of
    the phone.

  • Below you can see the battery compartment coming away from the rest
    of the phone.

  • With the battery compartment removed your phone should look like
    below. A ribbon connector (circled in blue)
    needs to be disconnected. It attaches like a plug and socket. Just lever
    this up to unplug. A second ribbon connector, circled in white, needs to
    be disconnected. To do so, lift the black part, which is on a hinge, up
    towards the ribbon. Then pull the ribbon out of the socket. The switches
    for the camera and volume buttons, indicated by the arrows, are stuck to
    the side of the phone with double sided tape. Peel each switch away from
    the side of the phone being careful not to damage the wire which
    connects each switch to the circuit board. Now remove the four screws
    you can see. The two at the bottom of the phone are longer than the two
    at the top. Remember this when you put the phone back together.

  • You can now simply lift the circuit board away from the rest of the
    phone, as shown below. Now pull the front cover in the direction of the
    arrows. This will release the grey plate which covers the back of the
    LCD screen.

  • With the grey plate removed your phone will look like below.

  • Now carefully slide something thin a flat, like a credit card or
    guitar plectrum, under the outer edge of the LCD screen. This will
    release the double sided tape holding it in place.

  • You should now have the LCD screen removed. Reverse the whole
    procedure for reassembly.

©️ Hello Guest ©️

"Please Read Forums Rules Before Posting !!!"

"And Introduce Your Self Here"
Back to top Go down
View user profile
Samsung S3650 Genio disassembly
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
» Tip: engine disassembly/cleaning
» Z3X latest update: Samsung Tool v.10.4 / Samsung tool 2G tools V3.5.0023
» samsung e2222 hang on logo done sa free soft
» s5263 samsung display rambol done sa jumper...
» Samsung C3303k shorted done...

Permissions in this forum:You cannot reply to topics in this forum
Jump to: